[Coral-List] PAR logger

Robert Miller rjmiller1 at gmail.com
Mon Jan 29 17:26:05 UTC 2007


Hi Ian,
Check out the self-contained par loggers from Alec Electronics (eg see
http://www.nijin.com.tw/en/alec/MKV-L.htm
available through Rockland Oceanographic, they are a little cheaper than
Li-Cor, especially if you need more than one sensor, and a lot more
convenient for underwater work.
cheers,
Bob

On 1/27/07, Jeremy J. Sofonia <jeremy at sofonia.com> wrote:
>
> Dear Ian,
>
> I agree with Mark in his recommendation in the use of the Li-Cor
> brand.  I've used these in the past and they have served us well.
>
> One thing that I would also suggest in regard to your study on the
> effect of sunlight intensity is to include a sensor not only at the
> depth of your subject corals, but also at the surface (i.e. two
> meters).  This way, you can assess the initial intensity of light in
> comparison to what is received by your corals and, as such, estimate
> light attenuation through the water column.  Obviously, I don't have
> detail on your proposed study, but you may find that this provides
> for more interesting discussion without much additional cost or effort.
>
> Kind Regards,
>
> Jeremy
>
>
> JEREMY J. SOFONIA
> Senior Marine & Environmental Consultant
> SKM Australia Pty. Ltd.
>
> 7th Floor, Durack Centre
> 263 Adelaide Terrace
> Perth, WA 6000
>
> http://www.skm.com.au
>
>
> On 27/01/2007, at 2:54 AM, Mark Warner wrote:
>
> > Ian,
> > The HOBO pendant is only good for getting an idea of relative light
> > intensity. Download the manual and you see that the spectral
> > response of the
> > sensor is very heavy in the red and peaks around 900 nm. Thus, this
> > will not
> > give you synonymous values to PAR. For your question, PAR is
> > better, as it
> > is grounded in the wavelength range (400-700 nm) that has biological
> > significance for photosynthetic organisms.
> >
> > Most submersible PAR sensors & loggers are simple, easy to use and
> > reliable,
> > but they are not cheap. For a slightly cheaper alternative to the
> > commonly
> > used Li-Cor brand, have a look here: http://www.apogee-inst.com/.
> >
> > Cheers,
> >
> > Mark
> >
> >
> > coral-list-request at coral.aoml.noaa.gov wrote:
> >
> >> Does anyone know of a simple, easy to use, reliable, submersable
> >> PAR logger?
> >> Or has anyone used the HOBO(r) Pendant 64K Temp/Light Data Logger
> >> to measure
> >> light intensity related to coral bleaching. In general, would light
> >> "intensity" (meaured in lumens) be an appropriate measure of the
> >> effect of
> >> sunlight intensity on corals or is PAR a better method to get at this
> >> question?
> >>
> >> All the best,
> >> ian lundgren
> >> Buck Island Reef National Monument
> >
> > -----------------------------------
> > Mark E. Warner
> > Assistant Professor
> > University of Delaware
> > College of Marine and Earth Studies
> > 700 Pilottown Rd.
> > Lewes, DE 19958
> > USA
> >
> > Phone: 302-645-4365
> > Fax:  302-645-4028
> >
> >
> >
> > _______________________________________________
> > Coral-List mailing list
> > Coral-List at coral.aoml.noaa.gov
> > http://coral.aoml.noaa.gov/mailman/listinfo/coral-list
>
> _______________________________________________
> Coral-List mailing list
> Coral-List at coral.aoml.noaa.gov
> http://coral.aoml.noaa.gov/mailman/listinfo/coral-list
>



-- 
Robert J. Miller, Ph.D.
Postdoctoral Scholar
Santa Barbara Channel LTER
Marine Science Institute
University of California, Santa Barbara
Santa Barbara CA 93106-6150
(805) 893-7295



More information about the Coral-List mailing list